TM18775-A2-GZ40-10 March 1999Hotwire 8775 M/SDSL Termination UnitInstallation InstructionsDocument Number 8775-A2-GZ40-10March 1999Product Documentation on the World Wide WebWe provide complete product documentation online. This lets you search thedocumentation for specific topics and print only what you need, reducing thewaste of surplus printing. It also helps us maintain competitive prices for ourproducts.Complete documentation for this product is available at www.paradyne.com.SelectLibrary →Technical Manuals →Hotwire DSL & MVL Systems.Select the following document:8775-A2-GB20Hotwire 8775 M/SDSL Termination Unit User’s GuideTo request a paper copy of a Paradyne document: Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396) Outside the U.S.A., call 1-727-530-8623Hotwire 8775 E1 M/SDSL Termination UnitThe Hotwire 8775 Termination Unit is a circuit card assembly (CCA) that containsfour E1 Multirate Symmetric Digital Subscriber Line (M/SDSL) ports. When the8775 Termination Unit is used in a Hotwire 8600 or 8800 Series Digital SubscriberLine Access Multiplexer (DSLAM) chassis, it transports 2048 kbps signals overtraditional twisted-pair telephone wiring.! HANDLING PRECAUTIONS FORSTATIC-SENSITIVE DEVICESThis product is designed to protect sensitive components from damagedue to electrostatic discharge (ESD) during normal operation. Whenperforming installation procedures, however, take proper static controlprecautions to prevent damage to equipment. If you are not sure of theproper static control precautions, contact your nearest sales or servicerepresentative.496-15104

installation overview

entering identity information

accessing and displaying configuration options

important safety instructions

document feedback

Paradyne Hotwire 8775 Installation Instructions Manual

installation instructions

front panel leds

configuring the unit

Hotwire 8775

about this guide

T TDM SDSL Overview

T Hotwire 8775 and 8785 Termination Unit Features

network configuration

T SNMP Management Capabilities

Telnet Session Options

initiating an ati session

screen work areas

Keyboard Keys

Switching Between Screen Areas

ending an ati session

Current and Default Factory Configurations

current and default factory configurations

General SNMP Management Options

saving configuration options

downloading firmware

disabling autorate

resetting the unit

T What to Monitor

T Viewing System and Test Status

Health and Status Messages

Self-Test Results Messages

T Performance Statistics

Viewing Network Performance Statistics

Viewing Current Network Performance

T Front Panel LEDs

accessing the test menu

running network tests

Line Loopback

Repeater Loopback

Remote Send Line Loopback

Send and Monitor 511

Data Terminal Loopback

Data Channel Loopback

Send Remote Data Channel Loopback

T Device Tests

ending an active test

messages and troubleshooting

configuring snmp traps

device messages

troubleshooting

creating a login

deleting a login

Assigning SNMP Community Names and Access Types

Configurations Not Running IP Conservative Software

T IP Addressing Example

configuration options

general snmp management options

snmp nms security options

snmp trap options

warmStart

T Overview

Hotwire 8600 DSLAM

Hotwire 8610 DSLAM

Hotwire 8800 or 8810 DSLAM

Hotwire 8820 DSLAM

Hotwire 8810 or 8820 DSLAM

T 100-Pin Plug-to-Four DB25 Receptacle EIA-530-A Cable

T 100-Pin Plug-to-Four MS34 Receptacle V.35 Cable

T 100-Pin Plug-to-Four DB37 Receptacle RS-449 Cable

T 100-Pin Plug-to-Four DB15 Receptacle X.21 Cable

technical specifications