Paradyne Hotwire 8775 Installation Instructions Manual

Also see for Hotwire 8775: Installation instructions User guide Installation instructions

Contents

Paradyne Hotwire 8775 Installation Instructions Manual Manual pdf 2 page image

2 8775-A2-GZ40-10March 1999Installation OverviewInstallation and configuration of the Hotwire 8775 Termination Unit consists of: Installing the Termination Unit in the DSLAM. Connecting to the DTE. Connecting to an MDF. Providing initial unit identity information or changing existing identityinformation. Configuring your unit using the Configuration Edit menus.Before you install the Hotwire 8775 Termination Unit, read theImportant SafetyInstructions on page 23.Be sure to register your warranty at www.paradyne.com. SelectService &Support →Warranty Registration.Tool Required Small- to medium-size flat-blade screwdriver.Planning the 8775 Termination Unit InstallationReview the following list to help plan for the installation. Obtain the applicable cables; refer toCables You Need on page 3. Make sure the Hotwire DSLAM chassis is installed and power is supplied tothe chassis. After the 8775 Termination Unit is installed, there are configurationprocedures that must be performed before you can begin to use the 8775Termination Unit. Refer to the User’s Guide for more detailed configurationprocedures.