Paradyne Hotwire 8777 Installation Instructions Manual

Also see for Hotwire 8777: User guide Installation instructions

Contents

Paradyne Hotwire 8777 Installation Instructions Manual Manual pdf 8 page image

8 March 2003 8700-A2-GN10-40Entering Identity InformationAfter accessing your unit for the first time, use the Change Identity screen todetermine SNMP administrative system information that will be displayed on theIdentity screen of the Status branch. To access the Card Identity screen, follow thismenu selection sequence:Main Menu →Control →Change IdentityConfiguring the UnitConfiguration option settings determine how the unit operates. Use theConfiguration branch of the termination unit’s menu to display or changeconfiguration option settings.The unit is shipped with factory settings in the Default Factory Configuration area.If the factory default settings do not support your network’s configuration,customize the configuration options for your application.Accessing and Displaying Configuration OptionsTo display the configuration options, you must first load a configuration option setinto the edit area.To load a configuration option set into the configuration edit area, follow this menuselection sequence:Main Menu →Configuration (Load Configuration From)Make a selection by placing the cursor at your choice and pressing Enter.If you select . . . Then . . .CurrentConfigurationThe selected configuration option set is loaded and theConfiguration Edit/Display menu screen appears.ConfigurationLoaderThe Configuration Loader screen is displayed allowing you toupload or download configurations from a TFTP server.Default FactoryConfigurationThe default factory configuration is loaded and the ConfigurationEdit/Display menu screen appears.