Paradyne IP DSLAM GranDSLAM 4200 Installation Manual

Also see for GranDSLAM 4200: User guide

2. Cabling4200-A2-GN20-10 October 2002 2-53. Connect the other end of the cable to the appropriate network equipment suchas a multiplexer.ProcedureTo connect to the 4202 E1 Uplink Module 75Ω connector:1. Determine the interface type, and procure the appropriate coaxial cable.2. Change the connector default to 75Ω using the ENT-T1 or ED-T1 TL1command (LINETYPE=G703SHORT75).3. Plug the TX coaxial cable into the TX 75Ω jack.4. Plug the RX coaxial cable into the TX 75Ω jack.CAUTION:Do not plug cables into both the 120Ω and the 75Ω connectors at thesame time.5. Connect the other end of the cables to the appropriate network equipmentsuch as a multiplexer.02-17277CoaxialCable 11213244816 20POWER AALARMRTN -48VDCBITSMGMTCONSOLESTATUSUPLINKALRMTESTBA3.5 A 60BE1 MODULE4202 TXRX120Ω75Ω