C-3 ComplianceAC30V series Variable Speed DriveMachinery DirectiveWhen installed in accordance with this manual the product will comply with the machinery directive 2006/42/EC.This product is classified under category 21 of annex IV as ‘logic units to ensure safety functions’. All instructions, warnings andsafety information can be found in Chapter 6.This product is a component to be incorporated into machinery and may not be operated alone. The complete machinery orinstallation using this equipment may only be put into service when all safety considerations of the Directive are fully implemented.Particular reference should be made to EN60204-1 (Safety of Machinery - Electrical Equipment of Machines).EMC COMPLIANCEWARNINGIn a domestic environment, this product may cause radio interference, in which case supplementary mitigation measures may berequired.DefinitionsCategory C1PDS (Power Drive System) of rated voltage less than 1000V, intended for use in the first environmentCategory C2PDS (Power Drive System) of rated voltage less than 1000V, which is neither a plug in device nor a movable device and, when used in the firstenvironment, is intended to be installed and commissioned only by a professional.Note: A professional is a person or an organisation having necessary skills in installing and/or commissioning power drive systems, including their EMC aspects.Category C3PDS (Power Drive System) of rated voltage less than 1000V, intended for use in the second environment and not intended for use in the firstenvironment.Category C4PDS (Power Drive System) of rated voltage equal to or above 1000V, or rated current equal to or above 400A, or intended for use in complexsystems in the second environment.First EnvironmentEnvironment that include domestic premises, it also includes establishments directly connected without transformers to a low-voltage powersupply network which supplies buildings used for domestic purposes.Note: Houses, apartments, commercial premises or offices in a residential building are examples of first environment locations.Second EnvironmentEnvironment that includes all establishments other than those directly connected to a low-voltage power supply network which supplies buildingsused for domestic purposes.Note: Industrial areas, technical areas of any building fed from a dedicated transformer are examples of second environment locations.www.comoso.com
