Safety InformationEN21 Safety InformationDo not operate this equipment until the safety information and instructions in this user guide have been read and understood by allpersonnel concerned.USER RESPONSIBILITYFAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSEDEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorised distributors provide product or systemoptions for further investigation by users having technical expertise.The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuringthat all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyse all aspectsof the application, follow applicable industry standards, and follow the information concerning the product in the current product catalogue and inany other materials provided from Parker or its subsidiaries or authorised distributors.To the extent that Parker or its subsidiaries or authorised distributors provide component or system options based upon data or specificationsprovided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications andreasonably foreseeable uses of the components or systems.Only competent personnel trained, qualified, and approved by Parker Hannifin should perform installation, commissioning, service and repairprocedures.This equipment is for indoor use only. Do not operate outdoors.With the exception of oxygen, any gas can cause asphyxiation in high enough concentrations. Always ensure that the generator is operated ina well ventilated area and all of the vent ports on the rear of the generator are kept clear and free from blockages.Use of the equipment in a manner not specified within this user guide may result in an unplanned release of pressure, which may cause seriouspersonal injury or damage.When handling, installing or operating this equipment, personnel must employ safe engineering practices and observe all related regulations,health & safety procedures, and legal requirements for safety.Ensure that the equipment is depressurised and electrically isolated, prior to carrying out any of the scheduled maintenance instructionsspecified within this user guide.Parker Hannifin can not anticipate every possible circumstance which may represent a potential hazard. The warnings in this manual cover themost known potential hazards, but by definition can not be all-inclusive. If the user employs an operating procedure, item of equipment or amethod of working which is not specifically recommended by Parker Hannifin the user must ensure that the equipment will not be damaged orbecome hazardous to persons or property.Most accidents that occur during the operation and maintenance of machinery are the result of failure to observe basic safety rules andprocedures. Accidents can be avoided by recognising that any machinery is potentially hazardous.Should you require an extended warranty, tailored service contracts or training on this equipment, or any other equipment within the ParkerHannifin range, please contact your local Parker Hannifin office.Details of your nearest Parker Hannifin sales office can be found at www.domnickhunter.comRetain this user guide for future reference.