Parker HMR Series Assembly And Operating Instructions Manual

Also see for HMR Series: Assembly and operating instructions

47 WWW.PARKERMOTION.COMPH: (724)-861-8200HMR Series Positioners① HMR② Type of ActuatorB Timing Belt Drive③ Frame Size8 Profile Width- 085mm 18 Profile Width- 180mm11 Profile Width- 110mm 24 Profile Width- 240mm15 Profile Width- 150mm④ Actuator DesignB Basic Profile with Ball Bearing Guide- No Outer CoverC Basic Profile with Ball Bearing Guide- IP54 with Outer CoverR Reinforced Profile with Ball Bearing Guide- No Outer CoverS Reinforced Profile with Ball Bearing Guide- IP54 with Outer Cover⑤ Motor Mounting Position and Drive Shaft Design (Belt Version)BD 090° Front with Double Plain Shaft CP 180° Down with Single Plain ShaftDD 270° Back with Double Plain Shaft AD 000° Up with Double Plain ShaftAP 000° Up with Single Plain Shaft CD 180° Down with Double Plain Shaft⑥ Carriage Design0 Standard 2 Bi-parting1 Tandem⑦ Order Stroke0000 4 digits input in mm⑧ Home Sensor (one sensor)0 No home sensorA PNP, 3 Wire, N.O., Internal MountingK NPN, 3 Wire, N.O., Internal MountingC PNP, 3 Wire, N.O., M8 Plug, 0.3m Cable, External MountingM NPN, 3 Wire, N.O., M8 Plug, 0.3m Cable, External Mounting⑨ Limit Sensor (one sensor each end)0 No limit sensorB PNP, 3 Wire, N.C., Internal MountingL NPN, 3 Wire, N.C., Internal MountingD PNP, 3 Wire, N.C., M8 Plug, 0.3m Cable, External MountingN NPN, 3 Wire, N.C., M8 Plug, 0.3m Cable, External Mounting⑩ Home Sensor Position0 No Home Sensor 6 60mm B 110mm G 160mm1 10mm 7 70mm C 120mm H 170mm2 20mm 8 80mm D 130mm J 180mm3 30mm 9 90mm E 140mm K 190mm4 40mm A 100mm F 150mm L 200mm5 50mm① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭HMR B 18 C DD 1 - 0250 - A B 9 0 0 G3 B6HMRB Order Code:14.2 HMRB*If travel is less than 75 mm, either home or limitsmay be chosen, but not both.*If travel is less than 20 mm, only a home can bechosen.

/ 49

Related manuals for Parker HMR Series