Parker P1V-S Installation Leaflet

Contents

Parker P1V-S Installation Leaflet Manual pdf 1 page image

4601503-P1V-S Issue 5Disconnect air and electrical supplies beforeattempting repair or maintenance.See ISO 4414-1982 for safety requirements coveringthe installation and use of pneumatic equipment.Koppla ifrån luft och elektriska anslutningar innanreparations-och underhållsarbeten påbörjas.Se ISO 4414-1982 för säkerhetsbestämmelsertäckande installation och användning av pneumatiskutrustning.NOTICE ALL DOCUMENTATION!Before beginning work this operating instructionbooklet has to be read through carefully. Always followthe instructions during operation. Give this operatinginstruction booklet to the operator.1. Important NotesThe safety and warning instructions containedshould always be followed!Safety and Warning SignsIMMEDIATE DANGERPossible consequences: death or grave injuries.DANGEROUS SITUATIONPossible consequences: slight or minor injuries.DAMAGING DANGERPossible consequences: damage to drive or thesurrounding area.Important instructions relating to explosionprotection.Application tips and other useful information.DefinitionPotentially explosive atmosphere (hereinafter referred to as“Ex-area”)= An atmosphere which could become explosive due tolocal and operational conditions.The observance of the operating instructions is theprecondition for an error free operation and the fulfillmentof warranty claims. Therefore, please read the operatinginstruction booklet prior to working with the air motor!The operating instruction booklet contains important tipsfor motor service and should therefore be kept in thevicinity of the motor.DisposalAlways observe the most current regulations fordisposal.Especially during installation, repair or maintenance waterdamaging agents, such as:• lubricating greases and oil• hydraulic fluid• cooling agents• solvent-containing cleaning agents may not leak intothe ground or into the sewage system!Such materials must be stored, transported, containedand recycled in suitable containers.Housing parts, tooth rings, shafts, as well as gear partsshould be disposed off as steel scrap.