Parmco AR 600-GAS Installation And Operating Instructions Manual

Also see for AR600: Installation and operating instructions Installation and operating instructions Installation and operating instructions Installation and operating instructions

Contents

Parmco AR 600-GAS Installation And Operating Instructions Manual Manual pdf 6 page image

43. INSTALLING THE APPLIANCEThe appliance must be installed by a qualified technician and according to the regulations in force. Thisappliance could be freestanding or built-in. It can also be installed next to a wall which is higher than theappliance, with a minimum distance of 150mm from the side of the appliance, as shown in the drawingbelow. Any wall cupboards or shelves must be at a distance of at least 750mm above the work surface.AR 600-GAS GAS ............................................................................................................. AR 900-GAS GASThe cooker is supplied with an anti-tilting chain to prevent the appliance fromtilting forward and any accidental damages to the gas pipe. Take theexpansion with the hook and make an adequate hole in the wall behind, atthe same height as the chain fixation area. Insert the plug into the hole andthen screw in the hook until it is fixed to the wall. Fix the chain to the hook.Adjust to the level of the cooker inserting the foot provided with somemodels.WARNING: Prior to installation, ensure that the nature of the gas, the gas pressure, and the adjustment of theappliance are compatible. The adjustment conditions for this appliance are as stated on the data plate. Check that this appliance is not connected to a ventilation/extraction device. It shall be installed andconnected in accordance with current installation regulations, with particular attention to the relevantventilation requirements.