Parmco HO-4-77NF-CER-T Installation And Operating Instructions Manual

Also see for HO-4-77NF-CER-T: Installation and operating instructions

Contents

Parmco HO-4-77NF-CER-T Installation And Operating Instructions Manual Manual pdf 10 page image

81. Hob layout2. Heating Zones Power Ratings3. Control Interface DescriptionAfter turning the hob on, the buzzer will beep once, all indicators will light up for 1 second then go out. Thisindicates the hob is active, and is now in standby mode.Operation Instructions:Switch on the ceramic hob by pressing the “On/Off” key. The hob will go into standby mode, with all the indicatorshowing “-”. If the ceramic plate is hot, the indicator shows “-” and “H” alternately.Press the “-” or “+“ to decrease or increase the power level. If the power level returns to 0, the zone switches off.Note: 1. In standby working mode, press the “ON/OFF” key, the hob will switch off.2. Press the “On/Off ” key, if there is no any other action within 1 minute, the hob will switch off.3. Every heating zone is independent of each other.Double loop functionIf you want to use bigger heating zone, press the “Double loop” key when the zone is in the working mode.Note: 1. The function is available in the 1# and 2# heating zone.2. You can change the power level from 1 to 9.3. When the Double loop function is on, the corresponding indicator shows “= “FEATURESOPERATING YOUR HOB

/ 13

Related manuals for Parmco HO-4-77NF-CER-T