Partex ProMark MK9 Quick Start Manual
                                | |
Contents
| 
Doc: MK9-M-04-02Quick Start Sidan/ Page: 31PROFILE SETTINGSProfile on CompactadiscsArt. No PVC Material Art. No Zerex Material Tube diam.Selected (mm)Chr.size mm inMANUALselectableSee instructionPO-02000SN* POZ02000KN* 2,5 2,0 APO-03000SN* POZ03000KN* 2,5 2,0 APO-04000SN* POZ04000KN* 3,2 2,0 APO-05000SN* POZ05000KN* 3,6 3,0 APO-06000SN* POZ06000KN* 3,6 3,0 APO-07000SN* POZ07000KN* 4,2 (5,2) 3,0 APP-04600SN* 2,5 2,0 APP-09000SN* 5,2 3,0 AArt. No PVC Material Art. No Zerex Material TAPE. Selected(mm)Chr.size mm inMANUALselectableSee instructionPO-068TW0SN* 9,0 4,0 BIn AUTO maximum character size is automatically selected by the MK9 with respect toselected tube diameter and pitch length. If a shorter pitch length is needed due to e.g spacereasons in a control panel a smaller character size selection can be the result of the printout.The settings given above are base on standard settings of space between characters andcharacter width. By selecting smaller values on these settings more characters with a largerfont can be printed on a given pitch length but with gradually less readability!Hints:* To get a good printing result the profiles temperature should be at least +25°C* When you are feeding the machine with profile, make sure that the profile side that facesthe reel core is turned upwards before you close the cassette cover.* To get a good printing result on Zerex profile, change the machines density valueA.Feed the profile trough themachine so that it prints on theside that faces the reel core(See the example to the right)B.Feed the profile trough themachine so that it prints on theside that doesn’t face the reelcore.(See the example to the right) |
Related manuals for Partex ProMark MK9
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine