ivSafety informationBefore installing and using the OT-200, take note of the following precautions:SAR compliance for body-worn operations requires at least 2 cm of separation between the device andthe user’s bodyRequest service for damaged products: Turn off the product, unplug it from the electrical outlet, andrequest service from a service partner under the following conditions:• The power cord or plug is damaged.• Liquid has been spilled into the product.• An object has fallen into the product.• The product has been exposed to rain or water.• The product has been dropped or damaged.• The product does not operate normally when you follow the operating instructions.Avoid hot areas: The product should be placed away from heat sources such as radiators, heat registers,stoves, and other products (such as amplifiers) that produce heat.Allow the product to cool: Allow the product to cool before removing covers and touching internalcomponents.Avoid wet areas: Never use the product in a wet location.Avoid inserting objects into product: Never insert objects of any kind into slots or other openings in theproduct.Clean the product properly: Unplug the product from the wall outlet before cleaning it. Do not use liquidcleaners or aerosol cleaners. Use a soft cloth dampened with water for cleaning exterior components, butNEVER apply water directly to the product or to an LCD screen.Use the product with approved equipment: Use your product only with the computers and accessoriesidentified as suitable for use with your product.Adjust the volume: Turn down the volume before using headphones or other audio devices.When device will not be used for a long period of time, please remove the battery, and store both deviceand battery in a cool, dark, and dry place. For storage over a long period of time, please place productin a dry box.SAR compliance for body-worn operations requires at least 2 cm of separation between the device andthe user’s body.