5Mount AssemblyAz-El assyPipeAdapterassyAzimuth FineTune RodElev PivotBlockClevisAssy1. Place the Pipe Adapter Assembly on to the 4in OD ground pipe, using 1/2” x 1 1/2” bolts.2. Attach the Az-El Assembly on to the Pipe Adapter Assembly using 1” x 5” bolt, washer, andlockwasher.3. Attach the Azimuth Fine Tune Rod as shown using 1/2” x 1 1/2” bolts,nuts, and washers.4. Install the Elevation Pivot Block as shown using 1/2” x 1 1/2” bolts, nuts, and washers.1/2” x 1 1/2” Bolts(6 )1/2” x 1 1/2” Boltsnuts, & washers (2 )1/2” x 1 1/2” Boltsnuts, & washers (2)1” x 5” Bolt, Flat washerand lockwasher

mount assembly

Patriot Antenna 1.8m Offset TxRx Installation & Assembly Instructions Manual