Patron E3 Product Manual
Also see for E3: User manual
        | |
E3 PRODUCT MANUALRENTQUIP USA INC. | 1-800-818-1199 | WWW.PATRONPRODUCTS.COMMAINTENANCEWARNING!NEVER SERVICE THE HEATER WHILE IT IS PLUGGED IN, RUNNING OR HOT. SEVERE BODILY INJUREOR ELECTRIC SHOCK MAY OCCUR.ONLY QUALIFIED PERSONS ARE ALLOWED TO OPEN HEATER FOR SERVICE. NO USER-SERVICE-ABLE PARTS INSIDE.• Keep heater clean. Use pressurized air to blow fan blades clean. Note! Use moderate pressure to avoiddamage to fan blades• Inspect heater before and after each use• The fan motor is sealed and has permanently lubricated bearingsSTORAGEWhen not in use, the heater must be disconnected from power source, cleaned of dust and stored in a dryplace.The power supply cord should be loosely wound around the handle of the heater.TECHNICAL SPECIFICATIONSHEAT OUTPUT BTU/Hr 10,200 (3,000W)AIRFLOW CFM 205ELECTRIC CONNECTION V ac / Hz 240 / 60 single phaseAMPERAGE DRAW A 12.5POWER CORD 3x16 AWGPLUG NEMA 6-15PEXTENSION CORD min. 3x12 AWGAMBIENT THERMOSTAT temp. range 32 - 100 °F (0 - 40 °C)LENGTH inches 11.8WIDTH inches 10.2HEIGHT inches 15.2WEIGHT lbs 20.3 |
Related manuals for Patron E3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine