Patton electronics 2012 Installation And Operation Manual
121001UAiPATTON ELECTRONICS CO. 2012 INSTALLATION A ND O PERATIONS MANUALProprietary NoticeThe information contained herein is proprietary and confidential to Patton Electronics Co. Any reproduction orredistribution of this publication, in whole or in part, is expressly prohibited unless written authorization is given byPatton Electronics Co.Warranty NoticeWARRANTIES: Patton Electronics Co. (hereafter referred to as Patton) warrants that its equipment is free from anydefects in materials and workmanship. The warranty period shall be two years from the date of shipment of equipment.Patton’s sole obligation under its warranty is limited to the repair or replacement of the defective equipment, provided itis returned to Patton, transportation prepaid, within a reasonable period. This warranty will not extend to equipmentsubjected to accident, misuse, alterations or repair not made by Patton or authorized by Patton in writing.Publication NoticeThis manual has been compiled and checked for accuracy. The information in this manual does not constitute awarranty of performance. Patton reserves the right to revise this publication and make changes from time to time in thecontent thereof. Patton assumes no liability for losses incurred as a result of out-of-date or incorrect informationcontained in this manual.Radio and TV InterferenceThe Patton MSDs generate and use radio frequency energy, and if not installed and used properly—that is, in strictaccordance with the manufacturer’s instructions—may cause interference to radio and television reception. The PattonMSDs have been tested and found to comply with the limits for Class A computing devices in accordance with thespecifications in Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection from suchinterference in a commercial installation. However, there is no guarantee that interference will not occur in a particularinstallation. If the Patton MSDs do cause interference to radio or television reception, which can be determined bydisconnecting the cables, the user is encouraged to try to correct the interference by one or more of the followingmeasures: moving the computing equipment away from the receiver, re-orienting the receiving antenna, and/orplugging the receiving equipment into a different AC outlet (such that the computing equipment and receiver are ondifferent branches).CE NoticeThe CE symbol on your Patton Electronics equipment indicates that it is in compliance with the electromagneticCompatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU). A Certificate ofCompliance is available by contacting Technical Support.ServiceAll warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returnsmust have a Return Materials Authorization number on the outside of the shipping container. This number may beobtained from Patton Electronics Technical Support at:tel: (301) 975-1007;email: support@patton.com;or, www: http://www.patton.com.NOTE: Packages received without an RMA number will not be accepted.Patton Electronics’ technical staff is also available to answer any questions that might arise concerning the installationor use of your Patton MSDs. Technical Support hours: 8AM to 5PM EST, Monday through Friday.Copyright© 2000 Patton Electronics Co., All Rights Reserved |
Related manuals for Patton electronics 2012
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine