Patton electronics 2604 Getting Started Manual

Also see for Model 2604: Administrator's reference guide

Contents

3 • Configuring the DACS for operation Model 2604 E1/T1 DACS Getting Started Guide40 Using a Web browser to complete DACS configuration2. Set theDS0 Display Type (see figure 22) todisplayLongForm(0). To create each static connection (whichis the DS0 Mapping Process), you will select from the following parameters:– Device Type. This setting specifies the physical interface onto which you will be connecting. Within theDACS, the user has the option of selecting T1/E1 WAN line.Figure 22. DS0 Mapping Configuration window– Device Slots. This parameter identifies which DS0 channels—each DS0 channel is 64 kbps—that youwould like to connect. Each time slot in a T1 or E1 WAN port has 24 or 31 DS0 channels, respectively.When selecting the slots you must select the same number of slots on the "A" and "B" side of the con-nection. The slots are selected by entering a string that represents the slots. For a WAN port configuredas a T1, the available slots are numbered from 1–24. For a WAN port configured as an E1, the availableslots are 1–31. The following notation should be used for entering the slots.• dash: (-) 1 - 4• comma: (,) 1,4,9• combo: 1 - 2, 3, 6 - 7• “A” and “B” identify the two ends of the static connection.Example on configuring static connections.Connect a T1 line, (WAN) Port 2, timeslots 4 – 5 and 7, to another T1 line, (WAN) Port 3, timeslots 8 – 10.Solution: Complete the following steps.1. Under “Dev Type A,” select t1-e1(1)2. Under “Dev Num A,” select port2(2)3. Under “Dev Slots A,” enter 4-5,74. Under “Dev Type B,” select t1-e1(1)5. Under “Dev Num B,” select port3(3)6. Under “Dev Slots B,” enter 8-107. Click on “Submit Query” to the right of the static connection entry which you just completed.