Patton electronics 2701/B User Manual

Also see for NetLink 2701: Specification sheet

Patton electronics 2701/B User Manual Manual pdf 4 page image

41.0 WARRANTY INFORMATIONPatton Electronics warrants all Model 2701/I components to be free fromdefects, and will—at our option—repair or replace the product should itfail within one year from the first date of shipment.This warranty is limited to defects in workmanship or materials, and doesnot cover customer damage, abuse, or unauthorized modification. If thisproduct fails or does not perform as warranted, your sole recourse shallbe repair or replacement as described above. Under no condition shallPatton Electronics be liable for any damages incurred by the use of thisproduct. These damages include, but are not limited to, the following: lostprofits, lost savings and incidental or consequential damages arisingfrom the use of or inability to use this product. Patton Electronics specifi-cally disclaims all other warranties, expressed or implied, and the instal-lation or use of this product shall be deemed an acceptance of theseterms by the user.1.1 RADIO AND TV INTERFERENCEThe Model 2701 generates and uses radio frequency energy, and if notinstalled and used properly—that is, in strict accordance with the manu-facturer's instructions—may cause interference to radio and televisionreception. The Model 2701 has been tested and found to comply with thelimits for a Class A computing device in accordance with the specifica-tions in Subpart J of Part 15 of FCC rules, which are designed to providereasonable protection from such interference in a commercial installa-tion. However, there is no guarantee that interference will not occur in aparticular installation. If the Model 2701 does cause interference to radioor television reception, which can be determined by disconnecting thecables, the user is encouraged to try to correct the interference by one ormore of the following measures: moving the computing equipment awayfrom the receiver, re-orienting the receiving antenna, and/or plugging thereceiving equipment into a different AC outlet (such that the computingequipment and receiver are on different branches).1.2 CE NOTICEThe CE symbol on your Patton Electronics equipment indicates that it isin compliance with the Electromagnetic Compatibility (EMC) directiveand the Low Voltage Directive (LVD) of the Union European (EU). A Cer-tificate of Compliance is available by contacting Technical Support.