Patton electronics 2960 Getting Started Manual

Also see for NetLink 2960 RAS: Datasheet Administrator's reference guide Getting started guide

Contents

Patton electronics 2960 Getting Started Manual Manual pdf 9 page image

9About this guideThis guide describes installing and configuring a Patton Electronics Model 2960/2996 Remote Access Server(RAS). By the time you are finished with this guide, your RAS will be receiving calls and transferring data. Theinstructions in this guide are based on the following assumptions:• The RAS will connect to a T1, E1, or PRI line• Callers will dial-in and connect with a V.90/K56Flex/V.34 or ISDN modem using PPP• There is a LAN connected to the Ethernet port of the RASAudienceThis guide is intended for the following users:• Operators• Installers• Maintenance techniciansStructureThis guide contains the following chapters and appendices:• Chapter 1 describes the RAS• Chapter 2 describes installing the RAS hardware• Chapter 3 describes configuring the RAS for use• Chapter 4 details how to power up and deactivate the RAS• Chapter 5 contains troubleshooting and maintenance information• Chapter 6 contains information on contacting Patton technical support for assistanceFor best results, read the contents of this guide before you install the RAS.