4SIPxNano IP-PBX Getting Started GuideSafety when working with electricityGeneral observations• Clean the case with a soft slightly moist anti-static cloth• Place the unit upright in the stand (included) to ensure free air circulation• Avoid exposing the unit to direct sunlight and other heat sources• Protect the unit from moisture, vapors, and corrosive liquidsThis device contains no user serviceable parts. The equipment shall bereturned to Patton Electronics for repairs, or repaired by qualifiedservice personnel.The external power adapter shall be a listed Limited Power Source. Ensurethat the power cable used meets all applicable standards for the country inwhich it is to be installed, and that it is connected to a wall outlet which hasearth ground. The mains outlet that is utilized to power the devise shall bewithin 10 feet (3 meters) of the device, shall be easily accessible, and pro-tected by a circuit breaker.Hazardous network voltages are present in WAN ports regardless of whetherpower to the SIPxNano is ON or OFF. To avoid electric shock, use cautionwhen near WAN ports. When detaching cables, detach the end away from theSIPxNano first.Do not work on the system or connect or disconnect cables during periods oflightning activity.In accordance with the requirements of council directive 2002/96/EC on Waste of Electrical and Electronic Equipment (WEEE),ensure that at end-of-life you separate this product from otherwaste and scrap and deliver to the WEEE collection system inyour country for recycling.WARNINGWARNINGWARNINGWARNING
