No Picture(Power LED is green)Make sure the Brightness and Contrast controls are set correctly.lMake sure the monitor cable is properly connected to yourcomputer.lCheck to see if the monitor cable has bent pins.lThe screen says"CONTROL MENU ISLOCKED" when youpress the OK knobPress the OK knob and hold for around 15 seconds to releasethe lock.lPicture is too large or toosmallAdjust the Horizontal Size and/or Vertical Size. Refer to the OnScreen Display chapter for details.lEdges of the picture arenot squareRefer to the Adjust Shape item in On Screen Display chapter fordetails.lColor appears blotchyRemove any nearby magnetic objects.l"Degauss" your monitor. Refer to the Degauss item in On ScreenDisplay chapter for details.lFace the monitor toward the East for the best picture quality.lMissing one or morecolorsMake sure the monitor cable is properly connected to yourcomputer.l"Degauss" your monitor. Refer to the Degauss item in On ScreenDisplay chapter for details.lCheck to see if the monitor cable has bent pins.lCheck the Color Temperature. Refer to the Color Temperatureitem in On Screen Display chapter for details.lDim PictureMake sure the Brightness and Contrast controls are set correctly.l"Degauss" your monitor. Refer to the Degauss item in On ScreenDisplay chapter for details.lPicture has double imageEliminate the use of extension cables and/or video switch box.lAdjust Moire to zero. Refer to the Adjust Moire item in On ScreenDisplay chapter for details.lPicture is not sharpLow down the Contrast and/or Brightness level.lAdjust Moire to zero. Refer to the Adjust Moire item in On ScreenDisplay chapter for details.l"Degauss" your monitor. Refer to the Degauss item in On ScreenDisplay chapter for details.lUnstable pictureIncrease the refresh rate of video signal at least to 75Hz. Refer tothe Quick Start Guide or contact your computer vender fordetails.lAdjust Moire to zero. Refer to the Adjust Moire item in On ScreenDisplay chapter for details.lFor further assistance, refer to the Consumer Information Centers list to contact your local Philipsdistributor.Troubleshootingfile:///D|/rita/LF2/LF2/LFa1/multi_manual/english/107P/SAFETY/saf_troub.htm (2 of 3) [8/29/2001 2:56:42 PM]