Safety and Troubleshooting InformationSafety Precautions and Maintenance • Troubleshooting • Regulatory Information • OtherRelated InformationSafety precautions and maintenanceWARNING: Use of controls, adjustments, or procedures other than thosespecified in this documentation may result in exposure to shock, electricalhazards, and/or mechanical hazards.Read and follow these instructions when connecting and using your computer monitor:Disconnect the monitor from the power supply if the monitor is not to be used for an extended periodof time.lDo not attempt to remove the back cover, as you will be exposed to a shock hazard. The back covershould only be removed by qualified service personnel.lDo not place objects on top of the monitor cabinet, objects could fall into vents or cover them andprevent proper cooling of the monitor's electronic devices.lTo avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain orexcessive moisture.lDo not use alcohol or ammonia-based liquid to clean the monitor. If necessary, clean with a slightlydamp cloth. Disconnect the monitor from the power supply before cleaning.lConsult a service technician if the monitor does not operate normally when operating instructions of thismanual are followed.RETURN TO TOP OF THE PAGESafety & Troubleshootingfile:///D|/Rita/LF3/lf3manual/english/109B/SAFETY/SAFETY.HTM [2002/7/7 ?? 11:15:41]