Philips 1200 Series User Manual

Also see for 1200 Series: User manual User manual User manual User manual User manual

Contents

5. Assembling the classic milk frother (specific types only)12Brewing drinksGeneral steps1 Fill the water tank with tap water and fill the bean hopper with beans.2 Press the on/off button to switch on the machine.- The machine starts heating up and performs the automatic rinsing cycle. During heating up, thelights in the drinks icons light up and go out slowly one by one.- When all lights in the drink icons light up continuously, the machine is ready for use.3 Place a cup under the coffee dispensing spout. Slide the coffee dispensing spout up or down toadjust its height to the size of the cup or glass you are using (Fig. 1).Personalizing drinksThis machine allows you to adjust the settings of a drink to your own preference. After selecting adrink you can:1 Adjust the aroma strength by tapping the aroma strength icon (Fig. 2). There are 3 strengths, thelowest is the mildest and the highest is the strongest.2 Adjust the drink quantity by tapping the drink quantity (Fig. 3) and/or the milk quantity icon(specific types only). There are 3 quantities: low, medium and high.You can also adjust the coffee temperature to your own preference (see 'Adjusting the coffeetemperature').Brewing coffee with beans1 To brew a coffee, tap the drink icon of your choice.- The aroma strength and quantity lights go on and show the previously selected setting.- You can now adjust the drink to your preferred taste (see 'Personalizing drinks').2 Press the start/stop button.- The light in the drink icon flashes while the drink is being dispensed.Specific types only: An americano is made of espresso and water. When you brew an americano,the machine first dispenses an espresso and then water.3 To stop dispensing coffee before the machine is finished, press the start/stop button again.To brew 2 coffees at the same time, tap the drink icon twice. The 2x light lights up.Brewing milk-based drinks with LatteGo (milk container)LatteGo consists of a milk container, a frame and a storage lid. To avoid leakage, make sure theframe and the milk container are properly assembled before you fill the milk container.10 English