Philips 140S1M Electronic User's Manual

Also see for 140S: Electronic user's manual User manual Specification sheet Specification sheet

Contents

TroubleshootingSafety and Troubleshooting • FAQs • Common Problems • Imaging Problems • RegulatoryInformation • Other Related InformationThis page presents problems that can be corrected by the user. If the problem still exists after these possiblesolutions, contact your nearest Philips dealer.Common ProblemsHaving this problem? Check these itemsNo Picture(Power LED not lit)Make sure the Power cable isplugged to the wall and theAdapter of the monitor.lMake sure the DC power cordhas been attached to the DCJack.lFirst, power button in front ofthe monitor should be in theOFF position, then press it toON position again.lNo Picture(Power LED is amber or yellow)Make sure the computer isturned on.lMake sure the signal cable isproperly connected to yourcomputer.lCheck to see if the monitorcable has bent pins.lThe Energy Saving featuremay be activatedlScreen says Make sure the monitor cableis properly connected to yourcomputer. (Also refer to theQuick Set Up Guide).lCheck to see if the monitorcable has bent pins.lMake sure the computer isturned on.lTroubleshootingfile:///D|/Philips LCD/english/140S/SAFETY/saf_troub.htm (1 of 3) [1/20/2001 3:03:27 PM]