Philips 19S1ES/00 Electronic User's Manual

Also see for 19S1: User manual

Contents

• Safety and Troubleshooting• General FAQs• Compatibility with Other Peripherals• LCD Panel Technology• Ergonomics, Ecology and SafetyStandards• Troubleshooting• Regulatory InformationFAQs (Frequently Asked Questions)General FAQsQ1: When I install my monitor what should I do if the screen shows 'Cannot display thisvideo mode'?A: Recommended resolution for Philips 19": 1280x1024 @60Hz.Unplug all cables, then connect your PC to the monitor that you used previously.In the Windows Start Menu, select Settings/Control Panel. In the Control Panel Window, selectthe Display icon. Inside the Display Control Panel, select the 'Settings' tab. Under the settingtab, in box labeled 'desktop area', move the slidebar to 1280x1024 pixels (19").Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK.Restart your computer and repeat step 2 and 3 to verify that your PC is set at1280x1024@60Hz (19").Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor.Turn on your monitor and then turn on your PC.Q2: What does the recommended refresh rate for LCD monitor?A:Recommended refresh rate in LCD monitors is 60Hz, In case of any disturbance on screen, you canset it up to 75Hz to see if that removes the disturbance.Q3: What are the .inf and .icm files on the CD-ROM? How do I install the drivers (.inf and .icm)?A: These are the driver files for your monitor. Follow the instructions in your user manual to install thedrivers. Your computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when you firstinstall your monitor. Follow the instructions to insert the ( companion CD-ROM) included in this package.Monitor drivers (.inf and .icm files) will be installed automatically.Q4: How do I adjust the resolution?