Philips 200P6IS/00 Service Manual

29Go to cover pageISP Instructions 200P6 LCDFig. 8If there is a warring message coming as shown in Fig 12. , youhave to check the AC power, Video cable, or Novatek MCU.Fig. 10Fig. 11Fig. 134 Press the file --> exit to end program , as shown in Fig. 11.4) Turn off the monitor, exit the factory mode.Fig. 145 Check the firmware version1). Turn off monitor.2).3).Press "OK" button, wait until the OSD menu come on theScreen of the monitor.You will find, after upgrade, the versionhave already changed from The former"HUDSON6 200P6V0.02 050104 With VIDEO" to the Present "HUDSON6 200P6V2.00 050328 With VIDEO" as shown in Fig. 13 and Fig. 14.[Push "AUTO" & "OK" buttons at the same time and hold them]+[Press "power" button untill comes out "Windows screen" ]=> then release all buttons.3 Press the AUTO to running program , the firmware be updatedas shown in Fig. 9~10.Fig. 12Fig. 9Factory Mode indicatorFactory Mode indicator