Philips 200P7ES/00 Service Manual

11200P7 LCDGo to cover pageFront ViewTo Lock/Unlock OSD FUNCTION(User Mode)The OSD function can be locked by pressing"OK"button for morethan 10 seconds, the screen shows following windows for 3 seconds.Everytime when you press"AUTO" or "OK" button, this message app-ears on the screen automatically.ATTENTION SIGNALOSD MAIN CONTROLS UNLOCKEDUnlock OSD functionLocked OSD function can be released by pressing "OK" button for morethan 10 seconds againATTENTION SIGNALOSD MAIN CONTROLS LOCKEDNO VIDEO INPUTThis screen appears if there is no video signal input. Please check thatthe signal is properly connected to the video card of PC and make surePC is onATTENTION SIGNALCHECK CABLE CONNECTIONWAIT FOR AUTOMATIC ADJUSTMENTThis screen appears when you press the "AUTO" buttons at the sametime. It will disappear when the monitor is properly adjustedATTENTION SIGNALWAITING FOR AUTOMATIC ADJUSTMENTAccess Aging.. ModeStep 1 : Turn off LCD monitor, and disconnect Interface Cablebetween Monitor and PC.Step 2 : [Push " " & " " buttons at the same time andhold it]+[Press power " " button until comes out " AGING screen"] => then release all buttons.Bring up:AGING...After 15 seconds, bring up:After 15 seconds, bring up:AGING...After 15 seconds, bring up:--------------------repeatlyConnect Signal cable again=> go back to normal display