Philips 200p7 User Manual

Also see for 200P7: Quick start guide E-manual E-manual User manual

Contents

FAQs (Frequently Asked Questions)Q: How can I avoid image retention?A: To reduce the possibility of image retention, we recommend:1. Avoid allowing a static image to remain on the screen for an extended periodof time.2. Set a screensaver to display a moving or random image when the LCDmonitor is not in use.3. Set the power saving or power management mode on your computer to powerdown the LCD monitor after 15 to 20 minutes of inactivity.4. Reduce your LCD monitor screen contrast and brightness levels.5. Turn off your LCD monitor when it is not in use.Q: Can image retention be repaired?A: No, image retention caused by static images displayed for lengthy periods can't berepaired and is not covered under Philips warranty.RETURN TO TOP OF THE PAGEScreen AdjustmentsQ: What is the FPadjust program on the CD-ROM?A: The FPadjust program generates alignment patterns that help you adjust monitorsettings such as Contrast, Brightness, Horizontal Position, Vertical Position, Phaseand Clock for optimal performance.Q: When I install my monitor, how do I get the best performance from the monitor?A:1. For best performance, make sure your display settings are set at1600x1200@60Hz for 20". Note: You can check the current display settings bypressing the OSD OK button once. The current display mode is shown in OSDfirst page.2. To install the Flat Panel Adjust (FPadjust) program located on the monitorsetup CD-ROM, open the CD-ROM and double-click the FP_setup4.3.exeicon. This will install FP Adjust automatically and place a shortcut on yourdesktop.3. Run FPadjust by double clicking the shortcut. Follow the instructions step bystep to optimize image performance with your system's video controller.file:///D|/My%20Documents/dfu/200P7/english/200p7/safety/saf_faq.htm (4 of 8)2006-12-11 1:16:19 PM