Philips 242B9 User Manual

62. Setting up the monitorConnect to PC1. Connect the power cord to the backof the monitor firmly.2. Turn off your computer and unplugits power cable.3. Connect the monitor signal cable tothe video connector on the back ofyour computer.4. Connect USB upstream cablebetween monitor and PC for thetouch functionality.5. Plug the power cord of yourcomputer and your monitor into anearby outlet.6. After connecting cables, slide theI/O cover into the slots on the rearmonitor and snap the I/O cover intothe place.7. Turn on your computer and monitor.If the monitor displays an image,installation is complete.WarningUSB 2.4Ghz wireless devices, suchas, wireless mouse, keyboard,and headphones, maybe haveinterference by the high-speed signalof USB 3.1 devices, which may resultin a decreased efficiency of the radiotransmission. Should this happen,please try the following methods tohelp reduce the effects of interference.• Try to keep USB2.0 receivers awayfrom USB3.1 connection port.• Use a standard USB extension cableor USB hub to increase the spacebetween your wireless receiver andthe USB3.1 connection port.2.2 Operating the monitorDescription of the control buttons7 6 25 431Switch monitor’s powerON and OFF.Access the OSD menu.Confirm the OSDadjustment.Adjust the OSD menu.Adjust the brightness level.Change the signal inputsource.Return to previous OSDlevel.SmartImage. There aremultiple selections:EasyRead, Office, Photo,Movie, Game, Economy,LowBlue Mode, Off.