Philips 27E1N5500E User Manual

Also see for Essence 5000 Series: Quick start guide User manual Manual User manual Quick start guide

24tab. Under the setting tab, in boxlabelled 'desktop area', move thesidebar to 2560 x 1440 pixels.• Open 'Advanced Properties' andset the Refresh Rate to 60 Hz, thenclick OK.• Restart your computer and repeatstep 2 and 3 to verify that your PC isset at 2560 x 1440.• Shut down your computer,disconnect your old monitor andreconnect your Philips LCD monitor.• Turn on your monitor and then turnon your PC.Q2: What is the recommendedrefresh rate for LCD monitor?Ans.: Recommended refresh rate inLCD monitors is 60 Hz, In case ofany disturbance on screen, youcan set it up to 75 Hz to see ifthat removes the disturbance.Q3: What are the .inf and .icm files?How do I install the drivers (.infand .icm)?Ans.: These are the driver files for yourmonitor. Your computer mayask you for monitor drivers (.infand .icm files) when you firstinstall your monitor. Follow theinstructions in your user manual,monitor drivers (.inf and .icm files)will be installed automatically.Q4: How do I adjust the resolution?Ans.: Your video card/graphic driverand monitor together determinethe available resolutions. Youcan select the desired resolutionunder Windows® Control Panelwith the "Display properties".Q5: What if I get lost when I ammaking monitor adjustments viaOSD?Ans.: Simply press the button, thenselect [Reset] to recall all theoriginal factory settings.Q6: Is the LCD screen resistant toscratches?Ans.: In general it is recommendedthat the panel surface is notsubjected to excessive shocksand is protected from sharp orblunt objects. When handling themonitor, make sure that there isno pressure or force applied tothe panel surface side. This mayaffect your warranty conditions.Q7: How should I clean the LCDsurface?Ans.: For normal cleaning, use a clean,soft cloth. For extensive cleaning,please use isopropyl alcohol. Donot use other solvents such asethyl alcohol, ethanol, acetone,hexane, etc.Q8: Can I change the color setting ofmy monitor?Ans.: Yes, you can change your colorsetting through OSD control asthe following procedures.• Press button to show the OSD(On Screen Display) menu• Press button to select the option[Color] then press button toenter color setting, there are threesettings as below.1. Color Temperature: The settingsare Native, 5000K, 6500K,7500K, 8200K, 9300K and11500K. With settings in the5000K range the panel appears"warm, with a red-whitecolor tone", while a 11500Ktemperature yields "cool,bluewhite toning".

/ 29

Related manuals for Philips Essence 5000 Series