Philips 5000 LATTE GO Service Manual

PHI 5000 LATTE GO / GO+ 01 INTRODUCTION9/9Reset to the default settingsAlarm signals summary: red displayWarnings signals summaryIt is possible to restore the default settings through the programmingmenu. The machine must be turned on and ready to work.Press the MENU button and scroll through functions list to select theRESET function.Press the OK button to select the function.When the change has been implemented, the OK message will bedisplayed.Press the ESC button to exit the programming function.The machine automatically exits the programming mode if no button ispressed for 3 minutes.>>RESET>Display DescriptionPut back the drip trayand coffee groundsdrawer; close theservice door.Coffee beanhopper empty.Brew group notinserted.Display DescriptionCoffee groundsdrawer full.Water tank empty.The machine is out ofservice.XXDisplay DescriptionThe machine is ready tobrew products: coffeebean hopper emptyIf the filter signal startsblinking, the AquaCleanfilter must be replaced.The machine is waitingto start the water circuitpriming process.The milk carafe ductsshould be cleaned.Display DescriptionThe machine must bedescaled.The machine is heatingup.The machine is rinsing.Brew group rebooting.FILTERSTARTCALCCLEANSTARTCALCCLEANSTARTCALCCLEANFILTERSTARTQUICKCLEAN