25ENEnglishCleaning the body of theapplianceRegularly clean the inside and outsideof the appliance to prevent dust fromcollecting.1 Wipe away dust with a soft dry clothfrom the body of the appliance.2 Clean the air outlet with a soft drycloth.Cleaning the watertank, water tray andNanoCloud rotaryhumidification wickNote• Cleaning the water tank, watertray and NanoCloud rotaryhumidification wick every week tokeep them hygienic.1 Pull out the water tank (fig. h).2 Pull out the water tray (fig. }).3 Take the wick wheel off the wicksupport (fig. ~).4 Rinse the water tank, water tray andNanoCloud rotary humidificationwick under a running tap.Note• Do not take the NanoCloud rotaryhumidification wick off the wheelduring cleaning.• Do not scrub the NanoCloud rotaryhumidification wick or place it underdirect sunlight.• If necessary, use a mild detergent toclean the water tank and water tray.In this case, rinse the water tankand water tray thoroughly.5 Wipe the outside of the water tankand water tray dry.6 Place the wick wheel on the wicksupport (fig. k).Note• When placing the wick wheel on thewick support, make sure that theprojections on the wick wheel fallsinto the corresponding grooves.7 Place the water tray back into theappliance (fig. l).8 Place the water tank back into theappliance (fig. p).Cleaning the pre-filterFilter alert lightstatus Follow thisCleaning lightgoes on (fig. )Clean the pre-filterNote• Only the pre-filter and NanoCloudrotary humidification wick arewashable. The Nano protect filter isnot washable.