Philips 6000 Series User Manual

Also see for 6000 Series: Quick start guide Quick start guide User manual Quick start guide Quick start guide

10ENWall mountNote• Improper wall mounting may result inaccident, injury or damage. If you haveany query, contact Consumer Care in yourcountry.• Before wall mounting, make sure the wallcan support the weight of your soundbar.• Before wall mounting, you need notremove the rubber feet at the bottom ofthe soundbar, otherwise the rubber feetcannot be fixed back.• Depending on the type of wall mounting,make sure that you use screws of asuitable length and diameter.• Please check whether the USB port onthe back of the soundbar is connectedto a USB device. If it is found that theconnected USB device affects the wall-mount, you need to use another USBdevice of the appropriate size.Screw length/diameterSuggested wall mounting heightYou are recommended to install the TVfirst before wall mounting the soundbar.With a TV preinstalled, wall mount thesoundbar 50mm/2.0’’ in distance from thebottom of the TV.WARNING!• To prevent injury, this apparatus mustbe securely attached to the floor/wallin accordance with the installationinstructions.• Suggested wall mounting height: ≤ 1.5meters.1 Drill 4 parallel holes (diameter3-8mm each according to wall type)on the wall.» The distance between the holesare: 664mm / 26”» You can use the wall mounttemplate provided for helpingthe drilling holes position on thewall.2 Tighten the wall mount brackets onthe wall with screws (included) andscrewdriver (not included). Makesure that they are securely installed.3 Lift the unit onto the wall mountbrackets and slot into place.31 ~50mm/2.0"2664 mm / 26”48mmφ4x40