Philips AC3737/10 User Manual

Also see for 3000 series: User manual User manual User manual User manual Manual

6EN4 Launch the “Air+” app and click on “Connect a New Device” or press the “+” button on the top ofthe screen. Follow the onscreen instructions to connect the appliance to your network.Note:• This instruction is only valid when the appliance is being set up for the first time. If the network haschanged or the setup needs to be performed again, see Chapter “Reset the Wi-Fi connection” onpage 6.• If you want to connect more than one appliance to your smartphone or tablet, you have to do thisone by one.• Make sure that the distance between your smartphone or tablet and the appliance is less than 10 mwithout any obstructions.Reset the Wi-Fi connectionNote:• Reset the Wi-Fi connection when your default network has changed.1 Put the plug of the appliance in the power socket and tap to turn on the appliance.2 Tap and hold and for 3 seconds until you hear a beep.» The appliance goes to pairing mode.» The Wi-Fi indicator blinks orange.3 Follow the steps 3-4 in “Setting up the Wi-Fi connection for the first time” section.4 Using the 2-in-1 Air Purifier&HumidifierSwitching the working modeNote: To rapidly improve the air quality, it's recommended to use the Purification ONLY mode.The appliance has two working modes: 2-in-1 mode and Purification ONLY mode.• 2-in-1 mode ( ):The water tank is correctly placed on the purifier.• Purification ONLY mode: After removing the water tank, the appliance goes to the this modeautomatically.Note: Once you have placed the water tank correctly, ensure that the transparent window of the watertank is aligned with the display panel on the same side.