Philips BDL4645E/00 User Manual

Also see for BDL4245E: User manual Brochure & specs

BDL3245E / BDL4245E / BDL4645E184.2.5. Configuration1 menuSwitch on stateAuto adjustPower saveLanguageColor systemPictureScreenAudioPIPConfiguration1Configuration2Advanced optionPanel savingNetwork control portNetwork settingsConfiguration resetFactory resetSwitch on stateSelect the display status used for the next powering on.• {Power off} - The display will remain off when the power cord isconnected to a wall outlet.• {Forced on} - The display will turn on when the power cord isconnected to a wall outlet.• {Last status} - The display will return to the previous power status(on/off/standby) when removing and replacing the power cord.Auto adjustUse this function to let the display automatically optimize the display ofVGA input image.NOTE: This item is functional for VGA input only.Power saveSet the display to reduce the power automatically.• {RGB} - Select {On} to let the display enter DPMS mode when nosignal detected from the HDMI Graphic mode, HDMI, DVI-D, orVGA inputs after three successive cycles.• {VIDEO} - Select {On} to let the display enter power saving modewhen no signal detected from the HDMI Video mode or YPbPrinputs after three successive cycles.LanguageSelect the language used in the OSD menu.The options are: { } / { } / { } / { } / { } /{ } / { } / { } / { }.Panel savingChoose to enable the panel saving functions to reduce the risk of the“image persistence”.• {Cooling Fan} - Select {On} to turn on the cooling fan all thetime. Select {Auto} to turn on/off the cooling fan according to thedisplay’s temperature.NOTES:• The default {Auto} option will start running the cooling fanif the temperature of 65°C (152°F) is reached, and will keeprunning for 30 minutes after cooling down to the temperatureof 62°C (144°F).• A temperature-warning message will be shown on the screenonce the temperature reaches 79°C (174°F). All key functionexcept [Power] key will then be disabled.• {Brightness} - Select {On} and the brightness of the image will bereduced to an appropriate level, and the Brightness setting in thePicture menu will become unavailable.• {Pixel shift} - Select the time interval ({Auto} / {10 ~ 900} Seconds/ {Off}) for the display to slightly expand the image size and shift theposition of pixels in four directions (up, down, left, or right).NOTE: The default {Auto} setting for menu item Pixel shift does notsupport menu items Zoom mode, H/V Position, and PIP.Color systemSelects the Color System depends on your input video format.The options are: {Auto} / {NTSC} / {PAL} / {SECAM} / {4.43NTSC} /{PAL-60}.NOTE: This item is functional for S-VIDEO or VIDEO input only.Network control portSelect the nectwork control port.The options are: {RS232} / {LAN(RJ45)}.NOTE: If {LAN(RJ45)} is selected, then {RS232} will not be activated,even if a cable is attached, and vice versa.Network settingsAssign {IP address}, {Subnet Mask}, and {Default gateway} for thedisplay.Network settingsNetwork host nameDHCPIP addressSubnet maskDefault gatewayLogin user nameLogin password9172255000---a d m i n0[ SET ]change [SET] in STOREZDisable1625500L---0000100---• DHCP - Choose to enable or disable the DHCP function. If enabled,the display will be assigned IP address, Subnet mask and Defaultgateway automatically. If disabled, you will be prompted to enter thefollowing value manually. Finally, press [SET] button to store and savethe chosen values.• IP address• Subnet mask• Default gateway• Login user name (The default user name is {admin})• Login password (The default password is {0000})Configuration resetReset all settings in the Configuration1 menu to factory preset values.Factory resetReset all the settings in the OSD menus of {Picture}, {Screen}, {Audio},{PIP}, {Configuration1}, {Configuration2}, and {Advanced option} tofactory preset values.Press [ ] or [ ] button to select [Reset], and then press [SET] buttonto do the reset.Factory resetCancel Reset