Philips BDL5531EL User Manual

Also see for BDL5531EL: Quick guide

User Manual BDL5531ELRETURN TO THE CONTENTS• Progressive - Enable the IP conversion function (recommended). Once enabled, the interlace input signalwill be converted to progressive format for better display quality.• Interlace: Disable the IP function. This mode is suitable for displaying motion pictures, but increases thechance of image retention.Film modeNote: For Video, S-Video, Component, and HDMI (video mode) inputs only.Choose to turn on or off the film mode frame conversion function.Use the UP/DOWN button to toggle between• Auto - Enable the film mode frame conversion function for movies and motion pictures. The displayconverts a 24 frames-per-second (24 fps) input signal format to DVD video signal format. Once thisfunction is enabled, it is recommended that you set the Scan conversion function to Progressive.• Off - Disable the film mode frame conversion function. This mode is suitable for TV broadcasting and VCRsignals.IR controlSelect the operation mode of the remote control when multiple BDL5531EL units are connected via RS232Ccables.Use the UP/DOWN button to toggle between• Normal - All units can be operated normally by the remote control.• Primary - Designate this display as the primary unit for remote control operation. Only this display will beoperated by the remote control.• Secondary - Designate this display as the secondary unit. This display can not be operated by the remotecontrol, and will only receive the control signal from the primary unit via the RS232C connection.• Lock - Lock the remote control function of this display. To unlock, press and hold the DISPLAY buttonon the remote control for 5 seconds.Keyboard controlChoose to enable or disable the function of the keyboard (control buttons) on the display.Use the UP/DOWN button to toggle between• Lock - Disable the keyboard.• Unlock - Enable the keyboard.TilingNotes:• For VGA input only.• This function is not available when PIP is turned on. Disable PIP to make Tiling accessible from the OSD menu.With this function you can create a single large screen matrix (display wall) that consists of up to 25BDL5531EL displays (5 units on the vertical side and 5 units on the horizontal side). This requires you toconnect each BDL5531EL unit in a daisy-chain configuration.