Philips BDL5571V User Manual

Also see for BDL5571V: Specifications

User Manual BDL5571V2Read and follow these instructions when connecting and using your computer monitor: Unplug the monitor if you are not going to use it for an extensive period of time. Unplug the monitor if you need to clean it with a slightly damp cloth. The screen many bewiped with a dry cloth when the power is off. However, never use alcohol, solvents orammonia-based liquids. Consult a service technician if the monitor does not operate normally when you have followedthe instructions in this manual. The casing cover should be opened only by qualified service personnel. Keep the monitor out of direct sunlight and away from stoves or any other heat source. Remove any object that could fall into the vents or prevent proper cooling of the monitor‟selectronics. Do not block the ventilation holes on the cabinet. Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture. If turning off the monitor by detaching power cable or DC power cord, wait for 6 secondsbefore attach the power cable or DC power cord for normal operation. To avoid the risk of shock or permanent damage to the set do not expose the monitor to rainor excessive moisture. When positioning the monitor, make sure the power plug and outlet are easily accessible. IMPORTANT: Always activate a screen saver program during your application. If a still imagein high contrast remains on the screen for an extended period of time, it may leave an „after-image‟ or „ghost image‟ on the front of the screen. This is a well-known phenomenon that iscaused by the shortcomings inherent in the LCD technology. In most cases the afterimage willdisappear gradually over a period of time after the power has been switched off. Be aware thatthe after-image symptom cannot be repaired and is not covered under warranty.