Philips BDL6545AT/00 User Manual

Also see for BDL6545AT -: Brochure

User Manual BDL6545ATRETURN TO THE CONTENTS• Progressive - Enable the IP conversion function (recommended). Once enabled, the interlace input signalwill be converted to progressive format for better display quality.• Interlance: Disable the IP function. This mode is suitable for displaying motion pictures, but it increasesthe chance of image retention.Film modeNote: For Video, S-Video, Component, and HDMI (video mode) inputs only.Choose to turn on or off the film mode frame conversion function.Use the UP/DOWN button to toggle between• Auto - Enable the film mode frame conversion function for movies and motion pictures. The displayconverts a 24 frames-per-second (24 fps) input signal format to DVD video signal format. Once thisfunction is enabled, it is recommended that you set the Scan conversion function to Progressive.• Off - Disable the film mode frame conversion function. This mode is suitable for TV broadcasting and VCRsignals.IR controlSelect the operation mode of the remote control when multiple BDL6545AT displays are connected viaRS232C cables.Use the UP/DOWN button to toggle between• Normal - All displays can be operated normally by the remote control.• Primary - Designate this display as the primary display for remote control operation. Only this unit can beoperated by the remote control.• Secondary - Designate this display as the secondary display. This unit can not be operated by the remotecontrol, and will only receive the control signal from the primary display via RS232C connection.• Lock - Lock the remote control function of this display. To unlock, press and hold the DISPLAY buttonon the remote control for 5 seconds.Keyboard controlChoose to enable or disable the function of the keyboard (control buttons) on the display.Use the UP/DOWN button to toggle between• Lock - Disable the keyboard.• Unlock - Enable the keyboard.TilingNote: This function is not available when PIP is turned on. Disable PIP to make Tiling accessible from the OSD menu.Tiling is also not recommended when the touch screen function is enabled.With this function you can create a single large screen matrix (display wall) that consists of up to 25BDL6545AT displays (5 displays on the vertical side and 5 displays on the horizontal side). This requires youto connect each BDL6545AT display in a daisy-chain configuration.