Philips BDS4222B User Manual

User Manual BDS4222B/V/R297.1.2 PICTURE-IN-PICTURE (PIP) / SIDE-BY-SIDEPICTURE (POP)PIP and POP modes allow you to view two video input sourcessimultaneously.Turning On PIP or POP Mode1 Press the PIP key once on the remote control to activate PIP mode.2 Press the PIP again to switch to POP mode.3 Press the PIP key sequentially will cycle between:PIP mode:In PIP mode, a small window is displayed in one of the four corners.The OSD on the upper right corner will denote the input selected formain picture (large screen) and the sub-picture (small screen) displayed.Notes:● Once PIP is turned off, the next time you return on PIP mode, theposition of the subwindow will start at default position.● In PIP mode it is not possible to combine video input (e.g. TV, AV, S-Video) with data input (e.g. DVI, RGB(VGA)).POP mode:In POP mode, the screen will be split in half. The screen on the left sideis the main picture and the screen on the right is the sub-picture. TheOSD on the upper right corner will denote the input signal source forboth the main and sub-pictures.There are two Side-by-Side picture modes available in addition to thestandard POP mode:■ POP (4:3) mode will display both main and subpicture in a 4:3 aspectratio within the POP windows.■ POP (16:9) mode will display both main and sub-picture in 16:9aspect ratio within the POP windows.PIP ModeM: TVS: AV Sub pictureInput source forSub pictureMain pictureInput source forMain picturePOP ModeM: TVS: AV Sub pictureInput source forSub pictureMain pictureInput source forMain picturePOP 4:3 ModeMainPictureSubPicturePOP 16:9 ModeMainPictureSubPicture