2 Rinse the coffee residues drawer and the brew group thoroughly with water. Carefully clean theupper filter (Fig. 31) of the brew group.3 Let the brew group air-dry before you place it back. Do not dry the brew group with a cloth toprevent fibers from collecting inside the brew group.Cleaning the brew group with the coffee oil remover tabletsOnly use Phillips Saeco coffee oil remover tablets. Follow the instructions given in the user manualthat comes with the coffee oil remover tablets.Lubricating the brew groupLubricate the brew group regularly to ensure that the moving parts continue to move smoothly. Seethe table below for the lubrication frequency. Visit www.philips.com/coffee-care for detailed videoinstructions.Usage frequency Nr of drinks brewed daily Lubrication frequencyLow 1-5 Every 4 monthsNormal 6-10 Every 2 monthsHeavy >10 Every monthCleaning LatteGoFor optimal cleaning, disassemble LatteGo and clean all parts in the dishwasher or under the tap withlukewarm water.LatteGo QUICK CLEANWhen you activate LatteGo QUICK CLEAN function, the machine forces hot water through the milksystem to quickly clean it. Use the LatteGo QUICK CLEAN function if you want to store LatteGo withmilk in the fridge.You can select the QUICK CLEAN function in the menu in the following way:1 Make sure that LatteGo is attached to the machine.2 Press the MENU button and select START QUICK CLEAN. Press the OK button ( ) to confirm.3 The display indicates that you have to place a bowl under the spout (Fig. 32).4 Press the OK button ( ) to start dispensing hot water.Thoroughly cleaning of LatteGO1 Remove LatteGo from the machine (Fig. 33).2 Pour out any remaining milk.3 Press the release button and remove the milk container from the frame of LatteGo (Fig. 34).4 Clean all parts in the dishwasher or under the tap with luke-warm water. You can also use somewashing-up liquid.Monthly cleaning of LatteGoOnly use Philips milk circuit cleaner for this cleaning cycle.1 Make sure that LatteGo is properly assembled.16 English