Philips EasyKey 1000 Series User Manual
                      |
9InitializationFingerprintAAAAAAAAAAAAAfter inserting the batteries intothe lock, perform the initializationprocedure and engage self-checking forlocking the door.It supports the enrollment of up to45 fingerprints, including 1 masterfingerprint and 44 user fingerprints.Indicator: blue light on for 2sBuzzer: one "Beep" soundThe first enrolled fingerprint willbe automatically set as the masterfingerprint, which allows you toperform operations such as adding userfingerprints and unlocking the door.Prerequisite: With batteries installedand the device in its default factorystate.Press the setup button once. You willhear a "beep" sound from the buzzer,and the blue light will stay continuouslylit, indicating that the device hasentered the setup mode.Master fingerprintAdd a master fingerprintMasterfingerprint 1 setUser fingerprint44 sets4 SettingsPress the finger that needs to beenrolled as the master fingerprint on the fingerprint sensor for 8 times.During the first 7 presses, the buzzerwill emit a short "beep" sound and theblue light will flash twice. On the 8thpress, the buzzer will emit two "beep"sound and the indicator will flash greentwice,indicating successful enrollmentand automatic exit.If the enrollment fails, the indicator willflash red twice and the buzzer will emitthree "beep" sound.AAA AAAAAA AAAClickLED in blue and emits a long“beep” sound12 |
Related manuals for Philips EasyKey 1000 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine