Philips HANDLEIDING 170S4FB Handleiding

Also see for 170S4FB: Service manual Specification sheet User manual

Contents

regulatory information

3. Refit the fuse cover.If the fitted plug is not suitable for your socketoutlets, it should be cut off and an appropriate3-pin plug fitted in its place.If the mains plug contains a fuse, this shouldhave a value of 5A. If a plug without a fuse isused, the fuse at the distribution board shouldnot be greater than 5A.Note: The severed plug must be destroyed toavoid a possible shock hazard should it beinserted into a 13A socket elsewhere.How to connect a plugThe wires in the mains lead are coloured inaccordance with the following code:BLUE - "NEUTRAL" ("N")BROWN - "LIVE" ("L")GREEN & YELLOW - "EARTH" ("E")1. The GREEN AND YELLOW wire must beconnected to the terminal in the plug which ismarked with the letter "E" or by the Earth symbolor coloured GREEN or GREEN ANDYELLOW.2. The BLUE wire must be connected to theterminal which is marked with the letter "N" orcoloured BLACK.3. The BROWN wire must be connected to theterminal which marked with the letter "L" orcoloured RED.Before replacing the plug cover, make certainthat the cord grip is clamped over the sheath ofthe lead - not simply over the three wires.Regulatory Informationfile:///D|/L/dutch/170s4fgbs/safety/regs/regulat.htm (13 of 14) [4/28/2003 2:02:50 PM]