Philips HDTV User Manual

Accessing Widescreen Viewing Modesusing OSDYou can also use the OSD menu to access thesame widescreen and zoom mode functions:1. Press the MENU +/- buttons on the remotecontrol or the front control panel.2. Make sure that the PICTURE menu isdisplayed.3. Use the MENU +/- buttons to navigate toSCREEN WIDTH and use the ADJ +/-buttons to switch between 4:3, 16:9 or PANO-RAMA.4. Use the MENU +/- buttons to navigate toZOOM and use the ADJ +/- buttons toswitch between zoom 1, 2 or 3. Please notethat this function is not accessible unless theSCREEN WIDTH is set to 16:9.10.3 On-Screen Display (OSD)SettingsAccessing OSD Settings MenuYou can set various OSD display settings fromthe OSD menu:1. Press the MENU +/- buttons on the remotecontrol or the front control panel.2. Use the ADJ +/- buttons to navigate toOTHER OSD Sub-menu as displayed below.OSD TimeoutInitiates the OSD timer when set to ON.Whenset to ON, the OSD will automatically disappearfrom the display if no button action is detectedfor the set number of seconds. If set to OFF,then the OSD will remain on the screen.OSD Time SettingSets the number of seconds the OSD will remainactive on the display before switching itself off.OSD TIMEOUT must be set to ON for thissetting to function.OSD BrightnessSets the brightness level of the OSD screenbetween 1 and 10.OSD BackgroundYou can set the OSD menu’s background totransparent or to blue. Set to OFF if you want atransparent setting. Set to ON if you want a bluebackground.OSD LanguageYou can set the OSD language to English, Frenchor Spanish.Note: To prevent a permanent after-image, westrongly suggest setting the OSDTIMEOUT to ON.33User Manual BDH5011