Philips HP4668 Owner's Manual

Also see for SalonStraight Seduce HP4668: User manual User manual User manual User manual

the straightener incorrectly, you could overheat your hair or evenburn it. Always make sure you select a temperature that is suitable foryour hair type (Fig. 2).Always select a low temperature setting when you start using thestraightener for the first time.For coarse, curly or hard-to-straighten hair, select a medium to highsetting (180 and up).For fine, medium-textured or softly waved hair, select a medium to lowsetting (170 and down).Take extra care with pale, blonde, bleached or colour-treated hair, sinceit will be susceptible to damage at high temperature settings.The display shows the selected temperature setting and the remainingtime of the straightening session.The bars on the display show the remaining usage time of thestraightener. The total usage time is 60 minutes. Every ten minutes oneof the six bars disappears. After 60 minutes the appliance switches off.1 Insert the plug into the wall socket.2 Press the on/off button.The temperature setting of 120 appears on the display. As soon as theappliance has heated up to this setting, the word ‘READY’ appears on thedisplay.Never leave the appliance unattended when it is plugged in. Never put theappliance on a surface that is not heat-resistant when it is heating up andwhen it is hot.Tip: the straightener heats up more quickly if you lock the plates withthe closing lock.3 Set the temperature you want to use by pressing the + button toincrease the temperature setting or by pressing the - button todecrease the temperature setting. The display tells you which settingyou have selected. When the appliance has heated up to the selectedsetting, the word ‘READY’ appears on the display (Fig. 3).4 Comb or brush your hair so that it is disentangled andsmooth. (Fig. 4)Tip: it is better to section off the crown area and to straighten the hairunderneath first, followed by the top area.5 Take a section that is not wider than 5 cm. Place it between thestraightening plates and press the handles of the appliance firmlytogether.6 Slide the straightener down the length of the hair in 5 seconds, fromroot to hair end, without stopping to prevent overheating (Fig. 5).7 Repeat this process after 20 seconds until you have achieved thedesired look.8 Allow your hair to cool down. Do not comb or brush it before it hascooled down, as this would ruin the hairstyle you have just created.Cleaning1 Make sure the appliance is switched off and unplugged.2 Let the appliance cool down completely on a heat-resistant surface.3 Clean the appliance with a damp cloth.StorageNever wind the mains cord round the appliance.1 Make sure the appliance is switched off and unplugged.2 Let the appliance cool down on a heat-resistant surface beforestoring it.3 Use the closing lock to lock the straightening plates together beforestoring the appliance.EnvironmentDo not throw the appliance away with the normal householdwaste at the end of its life, but hand it in at an official collectionpoint for recycling. By doing this you will help to preserve theenvironment (Fig. 6).Guarantee & serviceIf you need information or if you have a problem, please visit the Philipswebsite at www.philips.com or contact the Philips Customer Care Centrein your country (you will find its phone number in the worldwide guaranteeleaflet). If there is no Customer Care Centre in your country, turn to yourlocal Philips dealer or contact the Service Department of Philips DomesticAppliances and Personal Care BV.----,-,4222.002.6579.2HP4668/07 ProCeramic UltraGlideTroubleshootingIf problems should arise with your straightener and you are unable to solvethem by means of the troubleshooting guide below, please contact thenearest Philips service centre or the Philips Customer Care Centre in yourcountry.ProblemThe appliance does not work at all.1 Perhaps there is a power failure or the socket is not live. Check if thepower supply is working. If it is, check whether the socket is live byplugging in another appliance.2 Check if the mains cord of the appliance is damaged. If the mains cordis damaged, it must be replaced by Philips, a service centre authorisedby Philips or similarly qualified persons in order to avoid a hazard.,2 3 4 56

/ 2

Related manuals for Philips SalonStraight Seduce HP4668