4EN3 Get startedAlways follow the instructions in this chapter insequence.Install batteriesThe batteries can only back up clock and alarmsettings.Caution• Risk of explosion! Keep the batteries away from heat,sunshine or fire. Never discard batteries in fire.• Batteries contain chemical substances, so they shouldbe disposed of properly.Insert 2 AAA batteries (not provided) withcorrect polarity (+/-) as illustrated.Connect powerCaution• Risk of product damage! Make sure that the powervoltage corresponds to the voltage printed on the backor underside of the clock radio.• Risk of electrical shock! When you unplug the poweradaptor, always pull the plug from the socket. Neverpull the cord.• Use only the AC power adapter specified in themanufacturer or sold with this unit.Note• The type plate is located at the bottom of the clock radio.Set timeNote• You can only set time in standby mode.1 In standby mode, press and hold SET TIMEfor 2 seconds.2 Press HR to set hour and MIN to setminute, then press SET TIME to confirm.» The time is set.