Philips SENSEO HD7892/20 Manual

Also see for HD7892: User manual Quick start guide Manual

- Flush the coffee machine with fresh waterbefore you use it for the first time (seechapter ‘First use’). This causes the system tofill with water, which is essential for themachine to work properly.- Never interrupt the descaling process.- Never use a descaling agent based onmineral acids such as sulphuric acid,hydrochloric acid, sulphamic acid and aceticacid (e.g. vinegar). These descaling agentsmay damage the machine.- The machine is intended for normalhousehold use only. It is not intended for usein environments such as staff kitchens ofshops, offices, farms or other workenvironments. Nor is it intended to be usedby clients in hotels, motels, bed andbreakfast and other residential environments.- Do not disassemble the insulated jug.- Never immerse the insulated jug in water orany other liquid, as this could cause water toenter between the walls of the jug.- The insulated jug is not dishwasher-proof.- When the jug is filled with coffee, keep it inupright position to prevent leakage.- During brewing and until the light stopsblinking, the filter holder is filled with hotcoffee.General description1 1-cup pod holder2 2-cup pod holder3 Distribution disk4 Collector ring5 Drip tray6 CALC light7 Jug button8 2-cup button9 1-cup button10 Water reservoir lid11 Water reservoir12 Filter holder lid13 Filter holder14 Insulated jug lid15 Insulated jug16 Measuring spoonElectromagnetic fieldsThis Philips machine complies with all applicable standards and regulationsregarding exposure to electromagnetic fields.First useThe machine starts an automatic flushing cycle when you switch it on forthe first time, no matter which button you press.1 Put the plug in an earthed wall socket.2 Remove the water reservoir from the machine and remove the lid fromthe water reservoir (Fig. 2).3 Clean the water reservoir thoroughly in hot water, if necessary with somewashing-up liquid.4 Fill the water reservoir with clean cold water up to the MAX indication(Fig. 3).5 Put the lid back onto the water reservoir and put the water reservoir backonto the machine (Fig. 4).6 Place the 1-cup pod holder in the coffee machine. Close the lid andmake sure it is properly locked (Fig. 5).7 Remove the drip tray from the platform and put a bowl (with a capacityof at least 1 liter) or the jug under the coffee outflow (Fig. 6).8 Press one of the buttons on the control panel. All three lights startflashing (Fig. 7).9 The flushing cycle starts. During the flushing cycle the system fills itselfwith water from the water reservoir. The machine produces more noisethan during a regular brewing cycle.10 The machine switches off when the water tank is empty (Fig. 8).11 After the first flushing cycle, clean the collector ring and the pod holderwith hot water and some washing-up liquid or in the dishwasher. Rinsethe insulated jug under the tap.Brewing a jug of drip-filter coffee1 Open the lid of the machine (Fig. 9).2 Remove the pod holder, if present (Fig. 10).3 Remove the drip tray, if present.4 Fill the water reservoir with clean cold water up to the level required forthe number of cups of coffee you wish to brew and put the waterreservoir back onto the machine (Fig. 11).5 Rinse the insulated jug with hot tap water to preheat it .Tip: To obtain the tastiest and hottest coffee, brew at least half a jug ofcoffee.6 Place the filter holder on top of the insulated jug (Fig. 12).7 Open the lid of the filter holder.8 Put a paper filter size 102 in the filter holder. Make sure that you fold thesealed edges to ensure that the paper filter stays upright during brewing(Fig. 13).9 Use the measuring spoon to put the required amount of pre-groundcoffee in the filter (Fig. 14).Tip: Use one measuring spoon of pre-ground coffee for each cup. Use aheaped measuring spoon for strong coffee and a level measuring spoonfor mild coffee.10 Close the lid of the filter holder.11 Slide the insulated jug on the platform of the machine (Fig. 15).12 Press the jug button to start the brewing process (Fig. 16).- The light in the jug button starts flashing and the brewing processstarts. (Fig. 17)- When all the water from the water reservoir has passed through thefilter, the light in the jug button goes out and the machine switchesoff automatically.13 You can now remove the insulated jug from the machine (Fig. 18).14 Remove the filter holder from the insulated jug (Fig. 19).Tip: You can place the filter holder on the drip tray to prevent coffeefrom leaking onto your worktop while you pour out coffee from the jug(Fig. 20).15 Place the jug lid on the insulated jug and turn it to the keep-warmposition (closed lock symbol) (Fig. 21).16 Push the lever of the jug lid to pour coffee into one or more cups, (Fig.22)Brewing pod coffeeBrewing one cup of pod coffee1 Fill the water reservoir with clean cold water up to the MAX indicationand put it back onto the machine (Fig. 3).Note: The MIN indication on the water reservoir indicates the minimumamount of water required for brewing pod coffee. Always fill the waterreservoir beyond the MIN level.2 Put the plug in an earthed wall socket.3 Open the lid of the machine by moving the lever upwards (Fig. 9).4 Place the drip tray on the platform of the machine (Fig. 23).5 Place one pod in the 1-cup pod holder with the convex side pointingdownwards (Fig. 24).Note: Make sure that the pod holder is clean and the sieve in the centeris not clogged, e.g. with loose coffee grounds.Note: Make sure that the coffee in the pod is distributed evenly andpress the pod lightly into the pod holder.6 Place the 1-cup pod holder in the machine and close the lid (Fig. 5).7 Place a cup on the drip tray (Fig. 25).8 Press the 1-cup button to brew coffee. (Fig. 26)- The button starts flashing and the machine starts heating up (Fig. 27).- When the heating-up process is finished, the machine starts brewingcoffee (Fig. 28). After brewing, the machine switches offautomatically.9 Remove the coffee pod after use by lifting the pod holder out of themachine and emptying it (Fig. 10).Caution: Be careful when you do this, for there may still be some hotwater/coffee on the coffee pod(s).Caution: Never put normal ground coffee or use torn pods in the machine,as this causes it to become blocked.Brewing two cups of pod coffee1 To brew two cups of pod coffee,place the deeper 2-cup pod holder inthe machine. Place two pods in the 2-cup pod holder (Fig. 29).2 Press the 2-cup button to brew coffee (Fig. 30).- The button starts flashing and the machine starts heating up (Fig. 31).- When the heating-up process is finished, the machine starts brewingcoffee (Fig. 32). After brewing, the machine switches offautomatically.3 Remove the coffee pods after use by lifting the pod holder out of themachine and emptying it (Fig. 33).Note: Instead of two pods, you can also place a cappuccino pod, a hotchocolate pod or a special pod for a mug of strong coffee in the 2-cup podholder and place a mug under the coffee spout. In this case, press the 1-cupbutton instead of the 2-cup button to brew your beverage.