Philips Saeco Syntia HD8833 Operating Instructions Manual

Contents

• 18 •• 18 •Note: if the " " buttonlights up steady immediatelyafter start-up, the machine needscircuit priming; turn the selector dialclockwise to the " " position. Whenthe " " icon is displayed, turn theselector back to " " position.5 The " " light blinks quickly to showthe machine has entered the descal-ing automatic programme; when the" " light is steady, the 1 st limescaleremoval phase is on.6 Place an empty container under thesteam wand and another one underthe dispensing spout.7 When the " " button is lit up steady,turn the selector dial clockwise to the" " position; in this case the steam/hot water wand starts dispensing thedescaling solution at regular intervals.8 When the descaling solution in thewater tank is fi nished, the " " lightstarts blinking.9 Turn the selector dial to the " " posi-tion.Empty the container under the steamwand and the one under the dispensingspout.10 When the " " icon lights up steadyon the display, remove the water tank.11 Remove the water tank, rinse it andfi ll it up to the "MAX" level with freshdrinking water.12 Place the tank back in the machine. The" " light turns on steady to show themachine has entered the rinse phase.13 Place an empty container under thesteam wand and another one underthe dispensing spout.When the " " button is lit up steady,turn the selector dial clockwise to the" " position.14 When the " " light is blinking, turnthe selector dial to the " " position.15 When the " " button is lit up steady,turn the selector dial clockwise to the" " position; in this case the steam/hot water wand dispenses the rinsingwater continuously.