Philips Senseo HD7817/11 Service Manual

Also see for HD7817/12: Quick start guide

HD7817/10 /11 /12 /13 /14 /192-7Disassembly informationTo remove the brew chamber lid cover handle as follows:• Place the screwdriver on thepositions (see picture 1) andlift the cover over the snaplocks on both positions.• The cover lid can now belifted up a little and toremove the complete coverincluding lever and push rodsqueeze strongly with twofingers both legs of the pushrod (see picture 2) to eachother, so that the two pins willget out of the hinge positionon the brew chamber.• To remove lever from lid cover, take a screwdriver andbend carefully the two lips/ribs in the lid cover outwardsand push the lever with force out of the hinge.• Reassemble follow steps backwards, without using ascrewdriver.To remove the back cover handle as follows:• Remove valve outlet.• Start at the upper side of the back cover and stick ascrewdriver into the 2 snap locks positions and gentlypull the back cover from the appliance so that a littlechink between back cover and brew chamber becomesvisible.• Put the screwdriver in to the 4 rectangular holes (snaplocks) at the back and gently pull the screwdriver suchaway that the lips of the snap locks are bent outwards.• If all clicks positions are loose, it is possible to remove theback cover.• Reassemble follow steps backwards.picture 1picture 2Removing Brew chamber head handle as follows:• Disassemble back cover!• Place the appliance such a way that you are looking atthe boiler.• First remove the boiler from the snap lock position of thebrew chamber.• To remove the brew chamber,use your both thumbs (seepicture 3) and push stronglywith a little distortion(rotation) until the brewchamber comes loose.• Reassemble follow above steps backwards.To reach the components placed on the base handle asfollows:• First remove back cover, brew chamber and 3-way valve.• Remove both Torx T15 screws see exploded view in thenear of position A.• Bend the 2 click snap locks with a screwdriver (see base),and the housing can now be removed.• To remove the rest of the housing unlock the last 4 snaplocks at the base and gently pull of the front cover.• To reassemble follow above steps backwards.picture 3Disassembly- and reassembly advice