QSDR16RTCB User Manual336.2.1: MenuIn the Net-Viewer Main Interface window illustrated in Picture 71, the Menu toolbar is on the top left side of the screen.The toolbar includes a button for [Live] video, the option to [Replay] video, access to your [Setup] controls and a[Logout] button.6.2.1.1: LiveAs shown the Net-Viewer Main Interface window illustrated in Picture 71, the [Live] button will allow you to display alive video feed as illustrated in Picture 71. The live display mode will appear upon logging in to the Net-Viewerprogram.6.2.1.2: ReplayAs shown the Net-Viewer Main Interface window illustrated inPicture 71, the [Replay] button allows you to replaypreviously recorded footage and display it in your viewingwindow (Picture 72). To find previously recorded footage,select the date from the menu and choose the file from thefile list that will be displayed once you click on your desireddate (Picture 72).The buttons at the bottom of your Net-Viewer interfacescreen are as follows:Play Button: [Play]/[Pause] recorded footageStop Button: Stop playing recorded footageF.F. Button: Fast forward through recorded footageSlow Button: Decrease playback speed of recorded footageNext Frame: Playback recorded footage frame by frame264 TO AVI Button: Convert file from H.264 to AVI6.2.1.3: SetupAs shown the Net-Viewer Main Interface window illustrated in Picture 71, the [Setup] button will allow you to enter intoa sub menu which will allow you to configure the controls for your recording preferences, alarm preferences, PTZcontrol configuration and your network and system setting menus. The various tabs within this Setup sub menu areenumerated as follows:① RecordThe [Record] tab in the Setup menu allows you to control the specificchannels you wish to record (Picture 73). You are able turn eachchannel off individually and adjust the parameters of your recordedimages such as the quality and resolution. Audio recording controls canalso be controlled through the [Recording Mode] menu. Please notethat changes to your resolution settings cannot be done remotely andthat they must be made through the DVR directly as it needs to berestarted in order for the changes to take effect.(Picture 72)(Picture 73)