Q-See QC SERIES User Manual

Also see for QC-SERIES: User manual User manual Setup guide User manual Quick start guide

Q-See QC SERIES User Manual Manual pdf 23 page image

44 45You cannot use Copy/Paste in Motion Detection because each channel will have a differentdisplay. Right-clicking will exit the screen and your settings will be saved.Sensitivity – The system supports six levels of sensitivity with Level 6 being the mostsensitive.VIDEO LOSSBy default, this is enabled. In the event that the DVR detects a loss of signal from a camera,it will send out a notification or activate other functions based on your settings in the lowerportion of the Event window.CAMERA MASKINGThis is also enabled by default. If the system detects that something has covered a camera, itwill respond based on your settings in the lower portion of the window.EVENT RESPONSEThe lower portion of the Event window determines what actions the DVR will initiate upondetection of one of the three event types. Responses to a specific type of event can beindividually tailored to each camera, but the response to different types of events must be setindependently of each other. (ie: The response settings for a motion detection event do notchange the settings for a video loss event – even if you’ve set identical responses.)PICTURE 3-23PICTURE 3-24Trigger Period - This is where you set theschedule of when you want the DVRto record motion events. It operatesin the same manner as the Schedulemenu as described in Section3.6 with six blocks of time that canbe laid out for recording to occurduring a day. Not all blocks have tobe configured or enabled. You canconfigure each day individually, oryou can make separate schedules forweek days and weekends.SetSunMonTueWedThuFriSatMon00 :00 -24 :0000 :00 -24 :0000 :00 -24 :0000 :00 -24 :0000 :00 -24 :0000 :00 -24 :00Copy Paste Default Save Cancel0 3 6 9 12 15 18 21 24EVENTSEvent TypeEnableRegionPeriod Hold Time sec.ChannelSensitivityMotion Detect 130SelectSetCopy Paste Default Save CancelRec. Continue sec.10Show Message Alarm upload Send EmailRecord ChannelPTZ ActivationTourSnapshotBuzzer1 2 3 41 2 3 41 2 3 4SelectThe Set button will appear when eitherWork Day or Free Day is selected in thedrop-down. This allows you to arrange theschedule to reflect your business’ weeklyschedule.PICTURE 3-25SetSun Mon Tue Wed Thu Fri SatWork DayFree DaySave CancelThe Copy and Paste buttons allow you to duplicate a day’s settings on another day while theDefault button returns the DVR to recording Motion Detection events 24/7.Once you have made your settings, select OK to save them and you will be returned to theEvent menu. Hitting Cancel or right-clicking to exit the menu will not save your changes.Hold Time – This is the length of time that the DVR will watch for another motion event beforetreating a second event as a separate alarm. The delay can be from 0 to 600 seconds(10 minutes).Record Continue – The DVR will continue to record for a period after the event has ended.This can be set to last up to 5 minutes.Show Message – When this is enabled, the system will bring up the Alarm Status windowwhenever an event is detected. You can configure this to display when motion, videoloss or masking is detected.Alarm Upload – Your DVR can upload an alert message to the FTP server. Please seeAdvanced Network Setup in Section 1.2 of the Remote Monitoring Guidefor instructions on setting up the DVR to work with an FTP server.Send E-mail – E-mail notifications can be sent a single e-mail address. Please seeAdvanced Network Setup in Section 1.2 of the Remote Monitoring Guidefor instructions on how to set up the e-mail alerts including recipient address.Record Channel – When one camera detects an event, you can set the DVR to activaterecording on other cameras.PTZ Activation – When selected, this will cause a connected Pan-Tilt-Zoom camera toperform a pre-set action. This would be the first action programmed for the camera inthe PTZ menu. Please see Chapter 5 for instructions on setting up a PTZ camera.Tour – This will cause the DVR to cycle through selected channels on the display in live view.Snapshot – The DVR is capable of taking still images which can be sent via e-mail or FTP(See Advanced Network Setup in Section 1.2 of the Remote MonitoringGuide for full instructions.)Buzzer – When selected, the DVR’s internal alarm will sound when an event occurs.