Q-See QC444-403 Quick Installation Manual

Contents

Q-See QC444-403 Quick Installation Manual Manual pdf 6 page image

PART 6 - SETTING DVR TO RECORDThere are two modes for recording: Manual Recording and Scheduled Recording.MANUAL RECORDINGYou can get to the Manual Record menu by rightclicking on the screen with the mouse and se-lecting Record.This will take you to the Record menu. You canclick the All option on the Manual row to startrecording on all channels, or you can select onlythe cameras that you want to begin recording.To stop recording, select the Stop option undereach camera to cause that camera to cease re-cording, or you can selecting the All option in theStop row to cause all cameras to stop.View 1View 4Color SettingSearchRecordMain MenuSCHEDULED RECORDINGTo record on a schedule you will need to get to the Record menu as described above and select thecameras on the Schedule row instead of the Manual row.Next, go to the Main Menu, and click on Settings, and select Schedule. This will open the Sched-ule menu.The DVR is programmed with all cameras set to record constantly by default. You may set up yourown schedule to meet your specific requirements.There are six blocks of time you can use toschedule recording and each camera can beindividually configured or they all may share thesame schedule. In addition, you may set up indi-vidual schedules for each day, or you may sharethe same schedule across every day.Cameras may be scheduled to record in differentmodes at different times of the day.PICTURE 6-1PICTURE 6-2PICTURE 6-3PICTURE 6-4PICTURE 6-5PICTURE 6-6PICTURE 6-7An example of such a mixed schedule is shownin Picture 6-4. In this example, Camera 1 isscheduled to record if motion is detected (MD)from midnight to 8am and then records continu-ously from 8am to noon (Regular) followed by aone-hour motion detection recording segmentuntil 1pm before returning to continuous record-ing after that. Then, at the end of the day, it is inmotion detection mode from 5pm to midnight.The scale running along the bottom of the menuranges from 0 to 24, representing the hours ofa day. You can set starting and ending times toany specific minute you choose.SCHEDULEChannelWeek DayPeriod 1Period 2Period 3Period 4Period 5Period 6Wed1 400 :00 -08 :0008 :00 -12 :0012 :00 -13 :0013 :00 -17 :0017 :00 -24 :0000 :00 -24 :00Copy Paste Default Save CancelPreRecord sec.Record Type Regular MD Alarm MD/AlarmRegular MD Alarm MD/Alarm0 3 6 9 12 15 18 21 24Please note that this DVR does not support external alarms. Schedule settings utilizing Alarm record-ing will not produce any recordings.MOTION DETECTION RECORDINGThere are three steps to scheduling the DVR to record on motion.STEP 1. Return to the Record menu (Picture 6-2) and designate which cameras will berecording in Motion Detection mode.STEP 2. Next, go to the Schedule (Picture 6-3) menu as described above and set schedulefor each camera.STEP 3. After setting up the schedule go tothe Main Menu and select the Settingmenu. Inside, select the Detect window(Red square in Picture 6-5)The Detect window will allow you toconfigure your camera and the actionsthe DVR will perform when motion isdetected. Under Event Type selectMotion Detect, Select your Channel,or All, and select the enable option toenable the camera for motion detection.DETECTEvent TypeEnableRegionPeriodDelayShow Message Alarm upload Send EmailRecord ChannelTourSnapshotBuzzerAnti-dither sec.ChannelSensitivityMotion Detect 130sec.10SelectSetCopy Paste Default Save Cancel1 2 3 41 2 3 41 2 3 4

/ 9

Related manuals for Q-See QC403